El terminal móvil Dolphin 6100 se caracteriza por su diseño práctico, ergonómico y robusto (IP54); así como por su alto rendimiento en la recolección de datos.
Elaborado con componentes de alta calidad, es un terminal móvil muy compacto. Su formato, similar al de un teléfono móvil, cuenta con un tamaño de 175x66x27 mm y un peso ligero de tan sólo 250 g (incluyendo la batería).
Otras de sus principales ventajas es la potente batería de iones de litio que garantiza siempre el funcionamiento de los turnos de al menos ocho horas.
Características técnicas:
- Processor Marvell XScale PXA300 624 MHz
- Operating System Microsoft® Windows CE 5.0
- Memory 128 MB RAM X 128 MB Flash
- Display 2.8” transmissive active matrix 65k color LCD with backlight, QVGA (240 x 320)
- Keypad 28-key shifted alpha numeric with backlit keys
- WLAN Dual Mode 802.11 b/g (11 Mbps/54 Mbps) with internal antenna
- WLAN Security WEP, 802.1x, LEAP, TKIP, MD5, EAP-TLS, EAP-TTLS, WPA-PSK, WPA v2.0, PEAP, CCx4 (Pending)
- WPAN Bluetooth® Class II (10 m) v2.0 Enhanced Data Rate (EDR) with on-board antenna. BQB certified
- Expansion Slot User accessible Micro SD Card up to 4 GB with SDIO support
- Voice Communication Voice-over-IP and Push-to-Talk ready
- Audio Built-in microphone and speaker, stereo headset jack
- Communication Interface Full speed USB 1.1 from cradle (or I/O cable); RS232 (115 Kbps) from cradle
- Application Software Honeywell Powertools® and Demos
- Development Environment Honeywell SDK for Windows® CE 5.0
- Third Party Software SOTI MobiControl (remote device management), Naurtech CETerm™ Terminal Emulation (TNVT, 3270, 5250), and ITScriptNet™
- Battery Standard: Li-Ion, 3.7 V, 2200 mAh; Extended: Li-Ion 3.7 V, 3300 mAh (includes extended battery door)
- Expected Hours of Operation 8+ hours (with scan and continuously transmitting)
- Expected Charge Time Less than 4 hours
- Scanner / Decode Capabilities 5300SR 2D Imager with Adaptus Technology and Laser Aimer. Decodes all standard 1D, 2D, Postal and OCR codes
Comentarios
0 comentarios
Inicie sesión para dejar un comentario.