These are some of the most frequent queries about the Zebra GX430T printer. Below, we give some situations and the corresponding solutions.
- If your printer does not cut the ticket after printing, activate the check "enable cutter" within the box office configuration of the printers section.
- If your printer has a red cross in Box Office, follow these steps:
Press and hold down the button at the front of the printer until it flashes once. Two sheets will be printed automatically. In the second of the pages, there is a field that says IP Address.
Go to Box Office configuration and, in the printers section, enter the same IP that has been printed previously. In the port field, type 9100.
Remember that in the IP field it is important not to write the zeros on the left.
Article is closed for comments.